MASONRY CREAM DESIGNED TO INSULATE BRICKS AND POROUS BUILDING MATERIALS
Once applied, our Masonry Cream quickly becomes transparent, creating an invisible insulation barrier which penetrates up to 17 mm deep into the substrate and protects the masonry for over 20 years. It protects your walls from penetrating damp and the often resulting mould on walls. It also makes brickwork and walls self cleaning, allowing them to breathe naturally. A further benefit is the improvement to your wall’s thermal resistance with the bonus of reduced energy bills.
Penetrating Damp Ashford, Tunbridge Wells, Hastings, Folkestone, Dover
DAMP WALLS WILL REDUCE THE THERMAL EFFICIENCY OF YOUR HOME
APPLICATION
Applied by roller
After 5 minutes
After 10 minutes
After 20 minutes
Tests have shown that, for example, a damp content of only 5% in a standard brick wall can lower its insulation performance by up to 50% and is worse where cavity wall insulation has been installed.
Damp walls act as thermal bridges. When the pores of a wall contain moisture, more heat is transferred through the wall than if the cavities were filled with dry air. The thermal insulation properties of a wall decrease significantly with dampness.
Porous building materials, such as brick, solid brick and natural stone normally have good insulating properties as a result of their air-filled cavities, producing a low thermal conductivity. However, this is the case ONLY WHEN THEY ARE DRY. As soon as they get damp, the thermal conductivity rises significantly and they start to transfer heat much more efficiently.
A surface which has been treated with our waterproof exterior coating will effectively INSULATE brick and stone building materials by reducing their water absorption. The coating is resistant to dirt, atmospheric pollution, weathering and delays ageing.
INSULATING
The treatment allows the masonry to breathe and so be permeable to water vapour, in turn allowing air and moisture to pass from one side to the other. This eliminates penetrating damp and mould on walls and improves the thermal conductivity and insulation properties of the wall. A small increase of just 5% in the dampness of a wall with cavity wall insulation can reduce the thermal insulation performance by up to 50%.
BREATHABILITY
Dirt particles on treated brickwork are unable to obtain a hold and will be washed off with rainfall, resulting in masonry that remains clean and attractive. This also works well on aspects which are particularly exposed to the weather, shaded areas and areas with high air humidity or with high levels of sea salt.
SELF CLEANING EFFICIENCY
COMBINE ELEGANT APPEARANCE WITH HIGH PERFORMANCE
©COATEX Exterior Maintenance - Expert Waterproofing for walls and roofs | Damp Proof Paint | Penetrating Damp Hastings | Folkestone | Dover | Tunbridge Wells | Ashford | Canterbury | Kent | Sussex
t: 01424 575041 t: 01580 472033 Mob: 07377 341949

We cover roof & wall waterproofing, damp proofing walls, penetrating damp, exterior roof & wall coatings and exterior painting

in Tunbridge Wells, Ashford, Hastings, Folkestone, Dover, Canterbury, all Kent and Sussex and the whole of the South East.

Areas we cover
WEATHER CONDITIONS: RAIN, 3° CELSIUS

Waterproof Wall Coatings in Ashford, Tunbridge Wells, Hastings, Folkestone, Dover and all Sussex & Kent

COATEX Exterior Maintenance
Waterproof Wall Sealant - professionally applied for long-lasting protection
MASONRY CREAM DESIGNED TO INSULATE BRICKS AND POROUS BUILDING MATERIALS
Once applied, our Masonry Cream quickly becomes transparent, creating an invisible insulation barrier which penetrates up to 17 mm deep into the substrate and protects the masonry for over 20 years. It protects your walls from penetrating damp and the often resulting mould on walls. It also makes brickwork and walls self cleaning, allowing them to breathe naturally. A further benefit is the improvement to your wall’s thermal resistance with the bonus of reduced energy bills.
DAMP WALLS WILL REDUCE THE THERMAL EFFICIENCY OF YOUR HOME
APPLICATION
Applied by roller
After 5 minutes
After 10 minutes
After 20 minutes
Tests have shown that, for example, a damp content of only 5% in a standard brick wall can lower its insulation performance by up to 50% and is worse where cavity wall insulation has been installed.
Damp walls act as thermal bridges. When the pores of a wall contain moisture, more heat is transferred through the wall than if the cavities were filled with dry air. The thermal insulation properties of a wall decrease significantly with dampness.
Porous building materials, such as brick, solid brick and natural stone normally have good insulating properties as a result of their air-filled cavities, producing a low thermal conductivity. However, this is the case ONLY WHEN THEY ARE DRY. As soon as they get damp, the thermal conductivity rises significantly and they start to transfer heat much more efficiently.
A surface which has been treated with our waterproof exterior coating will effectively INSULATE brick and stone building materials by reducing their water absorption. The coating is resistant to dirt, atmospheric pollution, weathering and delays ageing.
INSULATING
The treatment allows the masonry to breathe and so be permeable to water vapour, in turn allowing air and moisture to pass from one side to the other. This eliminates penetrating damp and mould on walls and improves the thermal conductivity and insulation properties of the wall. A small increase of just 5% in the dampness of a wall with cavity wall insulation can reduce the thermal insulation performance by up to 50%.
BREATHABILITY
Dirt particles on treated brickwork are unable to obtain a hold and will be washed off with rainfall, resulting in masonry that remains clean and attractive. This also works well on aspects which are particularly exposed to the weather, shaded areas and areas with high air humidity or with high levels of sea salt.
SELF CLEANING EFFICIENCY
COMBINE ELEGANT APPEARANCE WITH HIGH PERFORMANCE
©COATEX Exterior Maintenance - Expert Waterproofing for walls and roofs | Damp Proof Paint | Penetrating Damp Hastings | Folkestone | Dover | Tunbridge Wells | Ashford | Canterbury | Kent | Sussex
t: 01424 575041 t: 01580 472033 Mob: 07377 341949
Areas we cover
WEATHER CONDITIONS: RAIN, 3° CELSIUS

Waterproof Wall Coatings in Ashford, Tunbridge Wells, Hastings,

Folkestone, Dover and all Sussex & Kent

Waterproof Wall Sealant - professionally applied for long-lasting protection

We cover roof & wall waterproofing, damp proofing walls, penetrating damp, exterior roof &

wall coatings and exterior painting in Tunbridge Wells, Ashford, Hastings, Folkestone, Dover,

Canterbury, all Kent and Sussex and the whole of the South East.

Areas we cover
COATEX Exterior Maintenance Penetrating Damp Ashford, Tunbridge Wells, Hastings, Folkestone, Dover
MASONRY CREAM DESIGNED TO INSULATE BRICKS AND POROUS BUILDING MATERIALS
Once applied, our Masonry Cream quickly becomes transparent, creating an invisible insulation barrier which penetrates up to 17 mm deep into the substrate and protects the masonry for over 20 years. It protects your walls from penetrating damp and the often resulting mould on walls. It also makes brickwork and walls self cleaning, allowing them to breathe naturally. A further benefit is the improvement to your wall’s thermal resistance with the bonus of reduced energy bills.
DAMP WALLS WILL REDUCE THE THERMAL EFFICIENCY OF YOUR HOME
APPLICATION
Applied by roller
After 5 minutes
After 10 minutes
After 20 minutes
Tests have shown that, for example, a damp content of only 5% in a standard brick wall can lower its insulation performance by up to 50% and is worse where cavity wall insulation has been installed.
Damp walls act as thermal bridges. When the pores of a wall contain moisture, more heat is transferred through the wall than if the cavities were filled with dry air. The thermal insulation properties of a wall decrease significantly with dampness.
Porous building materials, such as brick, solid brick and natural stone normally have good insulating properties as a result of their air- filled cavities, producing a low thermal conductivity. However, this is the case ONLY WHEN THEY ARE DRY. As soon as they get damp, the thermal conductivity rises significantly and they start to transfer heat much more efficiently.
A surface which has been treated with our waterproof exterior coating will effectively INSULATE brick and stone building materials by reducing their water absorption. The coating is resistant to dirt, atmospheric pollution, weathering and delays ageing.
INSULATING
The treatment allows the masonry to breathe and so be permeable to water vapour, in turn allowing air and moisture to pass from one side to the other. This eliminates penetrating damp and mould on walls and improves the thermal conductivity and insulation properties of the wall. A small increase of just 5% in the dampness of a wall with cavity wall insulation can reduce the thermal insulation performance by up to 50%.
BREATHABILITY
Dirt particles on treated brickwork are unable to obtain a hold and will be washed off with rainfall, resulting in masonry that remains clean and attractive. This also works well on aspects which are particularly exposed to the weather, shaded areas and areas with high air humidity or with high levels of sea salt.
SELF CLEANING EFFICIENCY
COMBINE ELEGANT APPEARANCE WITH HIGH PERFORMANCE
WEATHER CONDITIONS: RAIN, 3° CELSIUS
©COATEX Exterior Maintenance Expert Waterproofing for walls & roofs | Damp Proof Paint Penetrating Damp | Hastings | Folkestone | Dover Tunbridge Wells | Ashford Canterbury | Kent | Sussex

Waterproof Wall Coatings in Ashford,

Tunbridge Wells, Hastings, Folkestone,

Dover and all Sussex & Kent

Waterproof Wall Sealant - professionally applied for long-lasting protection

We cover roof & wall waterproofing, damp

proofing walls, penetrating damp, exterior

roof & wall coatings and exterior painting in

Tunbridge Wells, Ashford, Hastings,

Folkestone, Dover, Canterbury, all Kent and

Sussex and the whole of the South East.

Areas we cover
Penetrating Damp Ashford, Tunbridge Wells, Hastings, Folkestone, Dover